Osmio EZFITPRO - 400 Fluoride, Limescale and Heavy Metal Reduction Undersink Filter Kit
Osmio EZFITPRO - 400 Fluoride, Limescale and Heavy Metal Reduction Undersink Filter Kit
This is one of the top of the range installed inline system for an existing cold tap. It uses a 0.2 micron ceramic fluoride reduction filter and a limescale and heavy metal filter to achieve a thorough reduction of bacteria, chlorine, heavy metals and more. It reduces pressure and flow rate of your water to tap, so it is not recommended if you have very poor flow/low pressure. Slower flow means better water so it is good to live with that!
Osmio EZFITPRO-400 Undersink Water Filter Kit 15mm Push Fit
Filter 1: Coldstream CF521W ceramic filter cartrige.
✓ Made in the UK by world leading manufacturer
✓ >99.9999% removal of bacteria and cysts
✓ 85% fluoride reduction at 2.5LPM
The Osmio INDRA-400 Undersink Water Filter Kit with Tap is the perfect water filter system for those looking to improve the quality of water by removing bacteria, viruses, fluoride and pharmaceuticals as well as many common impurities such as sediment, dirt, turbidity, rust, sand and silt.
The system uses the Coldstream CF521W Ceramic Water Filter Cartridge 2.9" x 9.75" which is capable of 85% fluoride removal as well as chlorine, heavy metals and bacteria and cysts, making it the most powerful ceramic cartridge currently on the market.
Filter 2: GAC Phosphate & De-Alk
The Osmio 2.5 x 10 GAC & De-Alk Filter incorporates granular activated carbon (GAC) which is combined with De-alk resin (Purolite C107E). The filter is effective against chlorine, taste and odour, heavy metals e.g. lead, and will also tackle hard water, which is seen as limescale in kettles and as an unsightly scum on the surface of hot drinks. Water hardness varies greatly depending upon location, so the filter will need to be replaced at 3 - 6 monthly intervals or longer all of which entirely depends on the hardness of your water and the amount you use.
Dimensions: 9 3/4" x 2 1/2"
Temperature Range: Only can be used with cold water
Filter Life: 3-6 months depending on the hardness
Capacity: 1080 Litres @ 150ppm Total Hardness - 540 Litres @ 300ppm Total Hardness. Replace after 6 months of installation date
Max. Flow Rate: Approx. 4 -5 LPM
How to recycle and dispose of this filter: In order to recycle the filter you will need to smash the ceramic and the filter media within should go into the bin. The plastic ends of the filter can be recycled.
Shipping & Returns
Shipping & Returns
FREE UK SHIPPING